Liquefaction-induced structures in Quaternary alluvial gravels and gravelly sediments, NE Brazil

We have identified numerous well-preserved elutriation and fluidization structures probably induced by liquefaction in Quaternary gravels and gravelly sediments of braided fluvial channel deposits in the Rio Grande do Norte and Ceará states, northeastern Brazil. They show evidence of upward-directed water escape after sediment deposition and before sediment compaction. Among the several types of structures observed, the most frequent are pillars, pockets and dikes. These structures range in width from a few centimeters to as much as 4 m, and in height from 60 cm to 4 m. Dikes, pillars and pockets are systematically associated. Clastic dikes vented large quantities of sand to the upper layers or the surface; pebbles and cobbles from the host rock sank into the dikes and formed pillars and pockets. Pockets form the root part; pillars form the intermediate part and dike, the upper part of the composite structure. The morphology of the structures in sectional and plan views indicates a 3D geometry composed of a tabular dike and pillar that present a downward continuous transition to a bowl-shaped pocket. This “stratigraphy” of liquefaction features is different from that usually presented in the current literature. data suggest that both the location and the geometry of the features were controlled by sedimentary properties rather than joints and small faults. The size and abundance of these features suggest that they were formed by great events rather than localized mechanisms. Field evidence also indicates that these features are the product of fluidization and elutriation and may have been induced by liquefaction processes associated with seismic shaking. A nonseismic origin related to elutriation processes, however, cannot be ruled out for some of the features.