Migrating pingos in the permafrost region of the Tibetan Plateau, China and their hazard along the Golmud–Lhasa railway

Most pingos in the permafrost region of the high northern Tibetan Plateau form along active fault zones and many change position annually along the zones and thus appear to migrate. The fault zones conduct geothermal heat, which thins permafrost, and control cool to hot springs in the region. They maintain ground-water circulation through broken rock in an open system to supply water for pingo growth during the winter in overlying fluvial and lacustrian deposits. Springs remain after the pingos thaw in the summer. Fault movement, earthquakes and manʹs activities cause the water pathways supplying pingos to shift and consequently the pingos migrate. zard posed to the new Golmud–Lhasa railway across the plateau by migrating pingos is restricted to active fault zones, but is serious, as these zones are common and generate large earthquakes. Pingos have damaged the highway and the oil pipeline adjacent to the railway since 2001. One caused tilting and breaking of a bridge pier and destroyed a highway bridge across the Chumaerhe fault. Another has already caused minor damage to a new railway bridge. Furthermore, the construction of a bridge pier in the North Wuli fault zone in July–August 2003 created a conduit for a new spring, which created a pingo during the following winter. Measures taken to drain the ground-water via a tunnel worked well and prevented damage before the railway tracks were laid. However, pier vibrations from subsequent train motion disrupted the drain and led to new springs, which may induce further pingo growth beneath the bridge. grating pingos result from active fault movement promoting artesian ground-water circulation and changing water pathways under the seasonal temperature variations in the permafrost region. They pose a serious hazard to railway construction, which, in turn can further disturb the ground-water conduits and affect pingo migration.