Design and tests of 168-GHz, 500-kW gyrotrons and power supply system

A practical multi-gyrotron oscillation system, using collector-potential depression, composed of six gyrotron tubes and 3 U of power supplies, was designed, fabricated and tested. This system was designed to generate power levels of 3 MW for pulse duration of 1-s at ≈168 GHz for electron cyclotron heating of LHD at the National Institute for Fusion Science. The all-solid-state power supply unit can drive a maximum of three gyrotrons by equipping the collector power supply with three pairs of the anode and body power supplies. The gyrotrons used a TE31,8,1-mode interaction cavity. A single-stage depressed collector with sweeping coils was employed to increase system efficiency and reduce the heat flux to the collector surface. An internal converter produced a flattened Gaussian profile at a single-disk silicon-nitride window. The output mode was reconverted into the HE11 mode by an MOU. We reconstructed a main circuit of the power supply unit because of stray capacitors in the actual circuit. There were some differences between the designed and measured output wave profiles. The tubes were tested for 1-s pulse with power levels of 500 kW; system efficiencies were 30% at the peak and 28% at the average and temperatures of the windows were ≈200°C.