Title of article
Proposed high voltage power supply for the ITER relevant lower hybrid current drive system
Author/Authors
Sharma، نويسنده , , P.K. and Kazarian، نويسنده , , F. and Garibaldi، نويسنده , , P. and Gassman، نويسنده , , T. and Artaud، نويسنده , , J.F. and Bae، نويسنده , , Y.S. and Belo، نويسنده , , J. and Berger-By، نويسنده , , G. and Bernard، نويسنده , , J.M. and Cara، نويسنده , , Ph. and Cardinali، نويسنده , , A. and Castaldo، نويسنده , , C. and Ceccuzzi، نويسنده , , S. and Cesario، نويسنده , , R. and Decker، نويسنده , , J. P. Delpech، نويسنده , , L، نويسنده ,
Issue Information
روزنامه با شماره پیاپی سال 2011
Pages
4
From page
819
To page
822
Abstract
In the framework of the EFDA task HCD-08-03-01, the ITER lower hybrid current drive (LHCD) system design has been reviewed. The system aims to generate 24 MW of RF power at 5 GHz, of which 20 MW would be coupled to the plasmas. The present state of the art does not allow envisaging a unitary output of the klystrons exceeding 500 kW, so the project is based on 48 klystron units, leaving some margin when the transmission lines losses are taken into account. A high voltage power supply (HVPS), required to operate the klystrons, is proposed. A single HVPS would be used to feed and operate four klystrons in parallel configuration. Based on the above considerations, it is proposed to design and develop twelve HVPS, based on pulse step modulator (PSM) technology, each rated for 90 kV/90 A. This paper describes in details, the typical electrical requirements and the conceptual design of the proposed HVPS for the ITER LHCD system.
Keywords
High voltage power supply , Klystron , PSM technology , ITER LHCD system
Journal title
Fusion Engineering and Design
Serial Year
2011
Journal title
Fusion Engineering and Design
Record number
2357757
Link To Document