Geometric adjustment of pools to changes in slope and discharge: a flume experiment

To characterize the factors controlling pool shape, 30 different forced pools were created utilizing a 50% triangular constriction in a 0.5-m wide, 6-m long recirculating flume. Pools were scoured from an initial plane bed of sand with a d50 of 0.25 mm. Pool depth and length were measured and used as dependent variables in least-squares, multiple-regression analyses. Discharge, channel-bed gradient and energy slope were the independent variables. Additional linear-regression analyses were conducted with either pool depth or length and stream power. Results indicate that both pool depth and length are primarily a function of discharge. Channel-bed and energy slopes are also significantly related to pool length but are not significantly related to pool depth. Stream power is significantly related to both pool depth and length, but R2 values for pool depth versus discharge indicate stronger relations than those between pool depth and stream power. Observations on the type of geometric adjustment indicate that pools may minimize their rate of energy expenditure primarily through elongation. In contrast, pool depth appears to be more sensitive to the characteristics of the constrictions that create the forced pools. The results suggest that many field studies may suffer from cross-correlation problems. In particular, channel erodibility may exert a more dominant influence on pool geometry than hydraulic controls in many constriction-influenced channels.