Title of article :
Test result of 5 GHz, 500 kW CW prototype klystron for KSTAR LHCD system
Author/Authors :
Do، نويسنده , , H. and Park، نويسنده , , S. and Jeong، نويسنده , , J.H and Bae، نويسنده , , Y.S. and Yang، نويسنده , , H.L. and Delpech، نويسنده , , L. and Magne، نويسنده , , R. and Hoang، نويسنده , , G.T and Park، نويسنده , , H. and Cho، نويسنده , , M.H and Namkung، نويسنده , , W.، نويسنده ,
Issue Information :
روزنامه با شماره پیاپی سال 2011
Pages :
4
From page :
992
To page :
995
Abstract :
A 5 GHz LHCD system is being designed for current drive and profile modification necessary for AT mode and steady-state operation of the KSTAR tokamak. A prototype 500 kW CW klystron operating at 5 GHz was developed for the steady-state RF source. In this klystron, a multi-cell cavity is introduced to reduce cavity voltage and ohmic power loss. The klystron is designed with a triode system for optimization of gain, efficiency and beam control. The high voltage for the cathode is turned by using a thyristor switching system at the low voltage transformer unit. For anode voltage control, a mod-anode voltage divider system is used which utilize the parallel-circuit of the FET switch and Zener diodes. The RF output power of the klystron was 300 kW for 800 s and 450 kW for 20 s. The maximal temperature at collector top surface was 83 °C and power loss at the tube body did not exceed 10 kW, the interlock level for the protection of the klystron. Detailed results of the klystron system test and commissioning are presented.
Keywords :
Klystron , Lower hybrid , KSTAR steady-state
Journal title :
Fusion Engineering and Design
Serial Year :
2011
Journal title :
Fusion Engineering and Design
Record number :
2357914
Link To Document :
بازگشت