Characteristics of surface oscillation on high speed liquid Li jet

In the International Fusion Materials Irradiation Facility (IFMIF), high speed liquid lithium (Li) wall jet will be used as target irradiated by two deuteron beams of 125 mA at 40 MeV. To obtain knowledge of Li flow behavior, we have been studying on the surface wave characteristics experimentally using the liquid metal Li circulation loop at Osaka University. In this present study, the characteristic of surface oscillation on high speed liquid Li jet were examined. The free surface oscillation of Li flow was measured by an electro-contact probe apparatus, which detects electric contacts between a probe tip and Li surface. It was installed at 175 mm and 15 mm downstream from the nozzle exit to see influence of the initial growth of surface waves. The wave height of free surface waves was obtained from contact signal. While at 15 mm region the flow surface is very smooth covered with small waves in amplitude, the surface waves are developed sufficiently at the 175 mm. In the case of the velocity of 15 m/s, the maximum wave height reaches 4.8 mm. Heat deposition was estimated on the target back-plate with using the present statistical wave data.