Technological review of the HRP manufacturing process R&D activity

ENEA and Ansaldo Nucleare S.p.A. have been deeply involved in the European International Thermonuclear Experimental Reactor (ITER) R&D activities for the manufacturing of high heat flux plasma-facing components (HHFC), and in particular for the inner vertical target (IVT) of the ITER divertor. omponent has to be manufactured by using both armour and structural materials whose properties are defined by ITER. Their physical properties prevent the use of standard joining techniques. The reference armour materials are tungsten and carbon/carbon fibre composite (CFC). The cooling pipe is made of copper alloy (CuCrZr-IG). the last years ENEA and Ansaldo have jointly manufactured several actively cooled monoblock mock-ups and prototypical components of different length, geometry and materials, by using innovative processes: HRP (hot radial pressing) and PBC (pre-brazed casting). story of the technical issues solved during the R&D phase and the improvements implemented to the assembling tools and equipments are reviewed in the paper together with the testing results. timization of the processes started from the successful manufacturing of both W and CFC armoured small scale mockups thermal fatigue tested in the worst ITER operating condition (20 MW/m2) through the achievement of record performances obtained from a monoblock medium scale mockup. base of these results ENEA-ANSALDO participated to the European programme for the qualification of the manufacturing technology to be used for the procurement of the ITER divertor IVT, according to the F4E specifications. A divertor inner vertical target prototype (400 mm total length) with three plasma facing component units, was successfully tested at ITER relevant thermal heat fluxes. NSALDO and ENEA are ready to face the challenge of the ITER inner vertical target production, transferring to an industrial production line the experience gained in the development, optimization and qualification of the PBC and HRP processes.