Title of article
Preparation of the manufacture of the ITER correction coils
Author/Authors
Libeyre، نويسنده , , P. and Cormany، نويسنده , , C. and Dolgetta، نويسنده , , N. and Mitchell، نويسنده , , N. and Li، نويسنده , , H. and Wu، نويسنده , , W. and Du، نويسنده , , S. and Han، نويسنده , , S. and Liu، نويسنده , , L. and Wang، نويسنده , , Li and Wang، نويسنده , , Lin and Wei، نويسنده , , J. and Yu، نويسنده , , X. and Zhou، نويسنده , , Z. and Nijhuis، نويسنده , , A. and Sgobba، نويسنده , , S.، نويسنده ,
Issue Information
روزنامه با شماره پیاپی سال 2013
Pages
4
From page
1478
To page
1481
Abstract
The ITER correction coils (CC) include three sets of six coils each, distributed symmetrically around the tokamak and inserted between the toroidal field (TF) and the poloidal field (PF) coils. Each pair of coils located on opposite sides with respect to the plasma is series connected with polarity such to produce asymmetric fields. These superconducting coils use a cable-in-conduit conductor, insulated, wound into multiple pancakes and inserted inside an austenitic stainless steel case. The requirements and the main features of the design are presented and the selected options reviewed in terms of their criticality in achieving the specified tolerances. The requested qualification trials are identified and reports the results obtained so far.
Keywords
CASE , Correction coils , Manufacture , winding , IMPREGNATION
Journal title
Fusion Engineering and Design
Serial Year
2013
Journal title
Fusion Engineering and Design
Record number
2361414
Link To Document