High Temperature Mylonitization of Quartzofeldspathic Gneisses: Example from the Schirmacher Hills, East Antarctica

In the Schirmacher Hills, most of the ductile shearing took place under high to medium grade amphibolite facies metamorphism. The microstructure of the mylonites shows characteristic features of high temperature deformation and thus gives us an idea of deformation mechanisms of the constituent minerals at great crustal depth. The variation in microstructure of the sheared rock is partly due to heterogeneity of the intensity of strain from domain to domain, producing protomylonites, orthomylonites and ultramylonites. However, a large part of the microstructural variation has resulted from syn- to post-tectonic recrystallization and grain growth of constituent minerals. Both quartz and feldspar have deformed by crystal plastic processes with dominant grain boundary migration. The present aspect ratio of the feldspar grains is a result of various degrees of dynamic recrystallization along the grain boundary. The ratio varies between 1.5 and 2. Presence of exsolution lamellae in perthites and formation of myrmekite at the strained grains of K-feldspar suggest diffusion assisted dislocation creep. These mylonites are characterized by the presence of weakly strained or unstrained long quartz ribbons. The development of quartz ribbons with the absence of significant strain suggests grain recovery and grain growth during high temperature mylonitization. The growth of quartz ribbons took place by coalescing neighbouring grains both along and across the ribbon length. At the ultramylonite stage the fine-grained matrix of quartz and feldspar mostly accommodates the bulk strain.