Modeling the topography of shallow braided rivers using Structure-from-Motion photogrammetry

Recent advances in computer vision and image analysis have led to the development of a novel, fully automated photogrammetric method to generate dense 3d point cloud data. This approach, termed Structure-from-Motion or SfM, requires only limited ground-control and is ideally suited to imagery obtained from low-cost, non-metric cameras acquired either at close-range or using aerial platforms. Terrain models generated using SfM have begun to emerge recently and with a growing spectrum of software now available, there is an urgent need to provide a robust quality assessment of the data products generated using standard field and computational workflows. ress this demand, we present a detailed error analysis of sub-meter resolution terrain models of two contiguous reaches (1.6 and 1.7 km long) of the braided Ahuriri River, New Zealand, generated using SfM. A six stage methodology is described, involving: i) hand-held image acquisition from an aerial platform, ii) 3d point cloud extraction modeling using Agisoft PhotoScan, iii) georeferencing on a redundant network of GPS-surveyed ground-control points, iv) point cloud filtering to reduce computational demand as well as reduce vegetation noise, v) optical bathymetric modeling of inundated areas; and vi) data fusion and surface modeling to generate sub-meter raster terrain models. Bootstrapped geo-registration as well as extensive distributed GPS and sonar-based bathymetric check-data were used to quantify the quality of the models generated after each processing step. sults obtained provide the first quantified analysis of SfM applied to model the complex terrain of a braided river. Results indicate that geo-registration errors of 0.04 m (planar) and 0.10 m (elevation) and vertical surface errors of 0.10 m in non-vegetation areas can be achieved from a dataset of photographs taken at 600 m and 800 m above the ground level. These encouraging results suggest that this low-cost, logistically simple method can deliver high quality terrain datasets competitive with those obtained with significantly more expensive laser scanning, and suitable for geomorphic change detection and hydrodynamic modeling.