Title of article
Manufacturing of the Wendelstein 7-X divertor and wall protection
Author/Authors
Benhard M. Apon، نويسنده , , S. and Boscary، نويسنده , , J. and Greuner، نويسنده , , H. and Grigull، نويسنده , , P. and Kiكlinger، نويسنده , , J. and Li، نويسنده , , C. and Mendelevitch، نويسنده , , B. and Pirsch، نويسنده , , T. and Rust، نويسنده , , N. and Schweizer، نويسنده , , S. and Vorkِper، نويسنده , , A. and Weiكgerber، نويسنده , , M.، نويسنده ,
Issue Information
روزنامه با شماره پیاپی سال 2005
Pages
6
From page
463
To page
468
Abstract
The in-vessel components of Wendelstein 7-X (W7-X) with a total surface of 265 m2 comprise the divertor and the wall protection. The high heat flux (HHF) and lower heat flux (LHF) target, the baffle, the end plates closing the divertor chamber, a cryo vacuum pump (CVP) and a control coil form one divertor unit. Steel panels and the graphite heat shield protect the wall, including the ports. The HHF target elements, the steel panels and the control coils are manufactured by industry. The remaining components will be manufactured by the Max-Planck-Institute für Plasmaphysik (IPP) at its Garching workshops. For all components the final acceptance tests will be performed by IPP. This paper summarizes the main aspects for manufacturing, the preceding development and qualification tests as well as the final acceptance tests for the in-vessel components.
Keywords
Divertor , Steady-state operation , Wall protection , Plasma facing components , Manufacturing , Wendelstein 7-X
Journal title
Fusion Engineering and Design
Serial Year
2005
Journal title
Fusion Engineering and Design
Record number
2369747
Link To Document