Gravitational flow of a thin film of liquid metal in a strong magnetic field

The influence of a poloidal magnetic field of the spherical Tokamak on super thin (h ≈ 0.1 mm) film flow of liquid metal driven by gravity over the surface of the cooled divertor plate is addressed. The experimental setup developed at the Institute of Physics, University of Latvia (IPUL) is described, which makes it possible to drive and visualize such liquid metal flows in the solenoid of the superconducting magnet “Magdalena”. As applied to the above setup, the magnetic field effect on the operation of the capillary system of liquid metal flow distribution (CSFD) is evaluated by using molten metal (lithium or eutectic InGaSn alloy) with a very small linear flowrate q ≤ 1 mm2/s, spread uniformly across the substrate. The magnetic field effect on the main parameters of the fully developed film flow is estimated for the above-mentioned liquid metals. roximation technique has been proposed to calculate the development of the gravitational film flow. A non-linear differential second order equation has been derived, which describes the variation of the film flow thickness over the substrate length versus the flowrate q, magnetic field B and the substrate sloping α. s of InGaSn film flow observations in a strong (B = 4 T) poloidal magnetic field are presented. Analysis of the video records evidences of experimental realization of a stable stationary film flow at width-uniform supply of InGaSn.