Thermal activation of serpentine prior to acid leaching

The overall process for producing pure magnesium compounds from serpentinite usually starts with acid leaching. However, if serpentinite is calcined prior to leaching, not only faster magnesium dissolution is achieved, but use of thermally activated serpentine also significantly reduces the problems relating to corrosion of the leaching equipment, because less aggressive leaching agents can be used and/or lower leaching temperatures and pressures can be applied. This paper compares how calcination influences the dissolution behaviour of magnesium in solutions of hydrochloric acid, acetic acid and ammonium chloride. Fine-grained serpentinite, characterized by the extent of serpentine decomposition between 85 and 95%, displayed the highest reactivity. The initial magnesium dissolution rate of calcined serpentinite was up to 30-, 125- and 165-times higher as compared to that of uncalcined serpentinite in solutions of hydrochloric acid, acetic acid and ammonium chloride, respectively, under identical reaction conditions.