Self-gravity wake parameters in Saturn’s A and B rings

An increasing body of evidence shows that, at the sub-km level, Saturn’s main A and B rings are dominated by an ever-changing pattern of elongated, canted structures known as self-gravity wakes. Best known for causing azimuthal variations in the rings’ reflectivity, these structures also have a profound influence on how the transmission of the rings varies with both longitude and opening angle, B (Colwell et al. [2006] Geophys. Res. Lett. 33, 7201; Colwell et al. [2007] Icarus 190, 127–144; Hedman et al. [2007] Astron. J. 133, 2624–2629). We use data from three stellar occultations observed by Cassini’s Visual and Infrared Mapping Spectrometer (VIMS) to measure the transmission of the rings as a function of B, when viewed parallel to the wakes. These data are used to constrain properties of the self-gravity wakes as a function of radius across the A and B rings: specifically the fractional width of the gaps between the wakes, G / λ , and the average normal optical depth in the gaps, τ G . We find that the overall normal optical depth of the rings, τ n is primarily controlled by G / λ , which varies between <0.05 and ∼0.70 in the A and B rings. The gaps, however, are not completely empty, being filled by material — possibly cm-sized ring particles — with an average normal optical depth which varies from 0.12 to ∼0.4. In addition to regional variations, local variations in τ G are seen in the regular structure which dominates the inner B ring, and in the environs of strong density waves in the A ring. The same model applied to the lower optical depth Cassini Division reveals very little evidence of self-gravity wakes, except where τ n exceeds ∼0.25.