Numerical simulation of compressible gas flow and heat transfer in a microchannel surrounded by solid media

In this study, a numerical model is developed to investigate the coupled compressible gas flow and heat transfer in a microchannel surrounded by solid media. To accommodate the varying flow cross-section, the compressible gas flow model is established in a non-orthogonal curvilinear coordinate system. An iterative numerical procedure is employed to solve the coupled heat transfer and gas flow equations. The computer code for the compressible gas flow is first validated against two test problems, and then extended by including the heat conduction in the solid media. The effect of the inlet Mach number on the Nusselt number is examined. It is found that the pressure difference from the pyrolysis front to the heated surface is induced essentially by the gas addition from the channel wall, instead from the pyrolysis front. The necessity of accounting for the gas compressibility is clearly demonstrated when severe heating is applied. The pressure distribution obtained along the channel axial direction is useful for further structural analysis of composite materials.