Boundary layer receptivity measurements on compliant surfaces

This paper describes receptivity measurements in a pre-transitional boundary layer flowing over either a rigid or a compliant surface. Fluctuating velocities and frequency spectra were determined on one rigid and nine compliant surfaces. The results showed that the near wall receptivity grows linearly with Reθ. An empirical correlation of the gain frequency spectrum for a rigid wall was also established. For the compliant surfaces, the near wall gain is increased markedly near the leading edge of the plate due to the amplification of high and mid-frequencies. These frequencies are dissipated though as the flow progresses over the compliant surface such that the receptivity is lower on all the compliant surfaces than on the rigid surface at the trailing edge. An empirical correlation for the ratio of the gains on compliant and rigid surfaces in terms of the compliant surface coefficient ζ2/EρCSL2 and Reθ was established. This correlation indicates that compliant surfaces can suppress receptivity by up to 25% for a Reθ = 400.