Reconstruction of turbulent fluctuations for hybrid RANS/LES simulations using a Synthetic-Eddy Method

A coupling methodology between an upstream Reynolds Averaged Navier–Stokes (RANS) simulation and a Large Eddy Simulation (LES) further downstream is presented. The focus of this work is on the RANS-to-LES interface inside an attached turbulent boundary layer, where an unsteady LES content has to be explicitly generated from a steady RANS solution. The performance of the Synthetic-Eddy Method (SEM), which generates realistic synthetic eddies at the inflow of the LES, is investigated on a wide variety of turbulent flows, from simple channel and square duct flows to the flow over an airfoil trailing edge. The SEM is compared to other existing methods of generation of synthetic turbulence for LES, and is shown to reduce substantially the distance required to develop realistic turbulence downstream of the inlet.