Determination of fracture parameters for a bi-material center cracked plate subjected to biaxial loading using FEOD method

Fracture parameters of a bi-material plate containing a cener crack and subjected to biaxial tensile loading was calculated numerically. Based on the crack tip stress field obtained numerically in a bi-material joint and using the finite element over deterministic (FEOD) method, the stress intensity factors (KI and KII) and also non-singular T-stress terms, were determined for different material properties and biaxial loading cases. Due to asymmetry of loading and material properties in the investigated dissimilar plate, the center crack experinces mixed mode I/II fracture in general. By increasing the bi-material constant value, which shows the difference between the mechanical properties of two materials, the amplitude of stress intensity factor decreases. The obtained results from this method were in good agreement with the displacment field method prevousiuly reported by other researchers.