Title of article :
Liquid Sloshing Effect Analysis on Lateral Dynamics of an Articulated Vehicle Carrying Liquid for Various Filled Volumes
Author/Authors :
Saeedi، M. A. نويسنده Department of Mechanical Engineering, K. N. Toosi University of Technology, Tehran , , Kazemi، R. نويسنده Department of Mechanical Engineering, K. N. Toosi University of Technology, Tehran , , Azadi، S. نويسنده Department of Mechanical Engineering, K. N. Toosi University of Technology, Tehran ,
Issue Information :
ماهنامه با شماره پیاپی سال 2015
Abstract :
In this paper, the consequences of filled volume on the transient lateral dynamic and stabilities
boundaries displacement of an articulated vehicle carrying liquid is investigated. First, a sixteendegrees-
of-freedom nonlinear dynamic model of an articulated vehicle is developed. Then, the model
is validated by using TruckSim software. Next, the dynamic interaction of the fluid cargo with the
vehicle, by integrating a quasi-dynamic slosh model with a tractor semitrailer model is investigated. In
this study, the most important dynamic reposes are considered which include yaw rate, roll angle and
lateral acceleration for both the tractor and semitrailer as well as liquid center of mass lateral
movement. Also, to investigate the rollover stability of the vehicle, lateral load transfer ratio is
considered as an important factor. The dynamic system performance for three different filled volumes
is exhibited in j-turn and lane change standard maneuvers. The simulation results revealed that by
increasing the liquid volume the rollover probability rises due to the increase in roll angle and lateral
load transfer, especially in lane change maneuver.
Keywords :
Lateral Load Transfer , Rollover Stability , 16 degrees-of-freedom dynamic model , Articulated Vehicle Carrying Liquid
Journal title :
International Journal of Engineering
Journal title :
International Journal of Engineering