Title of article
SIMULATION OF NICKEL ELECTROFORMING PROCESS OF A REVOLVING PART USING FINITE ELEMENT METHOD
Author/Authors
Behagh، A.M. نويسنده Arshan Sanat Jam Co. Ltd , , Fadaei Tehrani، A. نويسنده Department of Mechanical Engineering, Isfahan University of Technology, Isfahan, Iran , , Salimi Jazi، H. R. نويسنده Department of Materials Science and Engineering, Isfahan University of Technology, Isfahan, Iran. , , Behagh، C. نويسنده Arshan Sanat Jam Co. Ltd ,
Issue Information
فصلنامه با شماره پیاپی 45 سال 2015
Pages
8
From page
20
To page
27
Abstract
In this paper a finite element model has been proposed for evaluation of primary and secondary current
density values on the cathode surface in nickel electroplating operation of a revolving part. In addition, the capability
of presented electroplating simulation has been investigated in order to describe the electroplated thickness of the
nickel sulfate solution. Nickel electroplating experiments have been carried out. A good agreement between the
simulated and experimental results was found. Also the results showed that primary current density can describe the
general form of thickness distribution but the relative value of current density using secondary current density can
present better description of thickness distribution.
Journal title
Iranian Journal of Materials Science and Engineering
Serial Year
2015
Journal title
Iranian Journal of Materials Science and Engineering
Record number
2405042
Link To Document