Title of article :
The Manufacturing Process of a 100-KW Prototype Microturbine as a Distributed Generation Method in Iran
Author/Authors :
Ziaei Tabatabaei, S S Mechanical Department of Niroo Research Institute, Tehran , Hashemi, A Renewable Energy Department of Niroo Research Institute,Tehran , Zolghadr shojaia, A Mechanical Department of Niroo Research Institute, Tehran , Meysami, A Mapna Turbine Engineering & Manufacturing Co., Fardis, Karaj
Issue Information :
فصلنامه با شماره پیاپی سال 2015
Abstract :
With ever increasing importance of distributed generation, especially microturbines, it is absolutely
vital to carry out feasibility study and research on manufacturing such systems in Islamic Republic of
Iran to shed light on manufacturing capabilities, limitations and constraints. The design process of a
semi-industrial prototype microturbine was conducted by Niroo Research Institute (N.R.I.). The design
process and the results have been presented in several papers. Having completed the initial evaluation,
the research team was able to determine and prepare production processes and workshop plans. With
the technical cooperation of the companies specialized in different areas of manufacturing, the main
components of the prototype were manufactured. Investment casting and CNC machining are among
the most important processes involved in the manufacturing of the prototype microturbine. In this
paper, we present manufacturing method of the main components and identify current and potential
manufacturing capabilities in the country along with the existing limitations and constraints.
Farsi abstract :
باتوجه به اهميت روز افزون توليد پراكنده، بخصوص ميكرو توربينها، لزوم انجام امكانسنجي و تحقيق در زمينه ساخت چنين سيستمهايي در داخل كشور كاملا ضروري به نظر ميرسد تا محدوديتها و پتانسيلهاي ساخت آنها روشن گردد. فرآيند طراحي يك نمونه نيمهصنعتي ميكرو توربين توسط پژوهشگاه نيرو صورت پذيرفته است. فرآيند طراحي و نتايج بدستآمده در تعدادي از مقالات ارائه شده است. پس از انجام بررسي اوليه، تيم تحقيقاتي از توانايي لازم به منظور تعيين فرآيندهاي توليد و آمادهسازي نقشههاي ساخت بهرهمند گرديد و باهمكاري فني شركتهاي تخصصي فعال در زمينههاي مختلف توليد، قطعات اصلي يك نمونه اوليه ساخته شد. در ميان فرآيندهاي طراحيشده جهت ساخت يك نمونه اوليه از ميكرو توربين،روش ريخته گري دقيق و ماشين كاري CNC از مهمترين فرآيندها بشمار ميروند. در اين مقاله، روش ساخت قطعات اصلي ذكر شده و تواناييهاي فعلي و بالقوه در داخل كشور به همراه محدوديتهاي موجود شرح داده ميشود.
Keywords :
Microturbine , Manufacturing Process , CNC Machining , Investment Casting , Sand Casting
Journal title :
Astroparticle Physics