Title of article :
Predictive Statistical Model for Indoor Manganese Airborne Particles Affected by Psychrometric Parameters
Author/Authors :
Mirmohammadi, Seyedtaghi Department of Occupational Health - Faculty of Health - Mazandaran University of Medical SciencesSari
Abstract :
Commonly, there are varieties of indoor airborne particles in the foundry factories. One of the main particle with emphasize on health effect on exposed human is manganese airborne particle. The current study considered correlation between indoor psychrometric parameters and manganese concetration in the workplace. Overall, fifty samples were collected by filter based on OSHA ID-121 method in the workplaces.
SPSS V.20 was used to find a predictive model using linear regression model. The mean personal exposure to manganese was 1.626 mg/m . The mean measured psychrometric 3 parameters for dry temperature, relative humidity and air velocity were 29°C, 52% and 1.2m/s, respectively. The correlations between personal exposures and indoor air parameters measurements showed a high significant relationship between personal exposure, dry temperature and wind speed in the factory (P< 0.05). This study concluded that controlling dry temperature and air velocity is the main effective parameters on airborne manganese concentration in the workplaces and
decreased the personal exposure.
Farsi abstract :
معمولا, انواع مختلفي از ذرات معلق در هوا داخل كارخانه ريخته گري وجود دارد. يكي از ذرات مهم با تاكيد بر اثر آن بر سلامتي افراد در معرض تماس با ذرات معلق حاوي منگنز است. مطالعه حاضر ارتباط بين پارامترهاي شرايط جوي محيط كار را با غلظت ذرات منگنز در محوطه كار را مورد بررسي قرار داده است. در مجموع، پنجاه نمونه هوا توسط فيلتر و با استفاده از روش استاندارد 121-OSHA ID در محيط كار مورد نظر جمع آوري گرديد. براي مشخص نمودن يك مدل آماري از نرم افزار SPSS V و از مدل رگرسيون خطي استفاده گرديد ميانگين غلظت تماس با ذرات منگنز برابر 1/626mg/m3 بوده است. ميانگين پارامترهاي شرايط جوي مانند دماي خشك، رطوبت نسبي و سرعت جريان هوا به ترتيب C°29, 52% ,1/2 m/s , به دست آمده است. نتايج همبستگي ما بين تماس شغلي با آلودگي و پارامترهاي شرايط جوي محيط كار يك رابطه معني دار موثري را بين تماس شغلي با آلودگي و دماي خشك و سرعت جريان هوا در كارخانه نشان داده است (P< 0.05) با استفاده از نتايج بدست آمده، با كنترل دماي خشك و سرعت جريان هوا بعنوان پارامترهاي اصلي موثر بر ميزان غلظت ذرات منگنز انتشار يافته در كارخانه مي توان ميزان تماس شغلي با اين آلاينده را كاهش داد.
Keywords :
Foundry , Humidity , Dry temperature , Exposure , Manganese
Journal title :
Astroparticle Physics