Title of article
A Closed Loop Control of Quadratic Boost Converter Using PID-controller
Author/Authors
Samuel Rajesh Babu, R Department of EIE - Sathyabama University , Deepa, S Department of EEE - Panimalar Engineering College , Jothivel, S Department of EIE - Sathyabama University
Pages
10
From page
1653
To page
1662
Abstract
This paper presents an implementation of open loop and closed loop control of quadratic boost converter (QBC) using PID-controller. QBC consists of boost converter and fly back converter driven
by a single switch. QBC is designed especially for regulating the DC interface between various micro sources and DC-AC inverter to electricity grid. QBC, P, PI and PID-controller are modeled, compared
and evaluated by MATLAB simulation. It has been found that the transient and steady state performance is improved using PID-controller. This converter achieves high step-up voltage gain with
appropriate duty ratio and low voltage stress on the power switch. The simulated open loop and closed loop performance is verified experimentally.
Farsi abstract
در اين مقاله به كارگيري كنترل باز و بسته تبديل كننده تقويتي چهارتايي (QBC) با استفاده از كنترلرPID مورد بررسي قرار مي گيرد. QBC شامل تبديل كننده تقويتي و پرواز برگشت توسط يك تك سوئيچ است. به طور ويژه، QBC براي تنظيم رابط DC بين ميكروسورس هاي مختلف و اينورتر DC-AC با شبكه برق طراحي شده استQBC . و كنترلرهاي P، PI و PID به كمك شبيه ساز MATLAB مدل شده و مورد مقايسه و بررسي قرار گرفتند. مشخص شد كه عملكرد حالت گذرا و ماندگار با استفاده از كنترلر PID بهبود يافته است. اين تبديل كننده به ولتاژ گام بالاي خوبي با نسبت بار مناسب و استرس ولتاژ پايين روي سوئيچ قدرت دست مي يابد. حلقه
باز شبيه سازي شده و عملكرد حلقه بسته به شكل تجربي تأييد شدند.
Keywords
Renewable Energy Systems , Highstep-up Voltage Gain , Coupled Inductor , PID-controller , Quadratic Boost Converter (QBC)
Journal title
Astroparticle Physics
Serial Year
2014
Record number
2424229
Link To Document