Title of article :
Modeling and Optimization of the Coagulation–Flocculation Process in Turbidity Removal from Aqueous Solutions Using Rice Starch
Author/Authors :
Usefi ، S. - Qom University of Medical Sciences , Asadi-Ghalhari ، M. - Qom University of Medical Sciences
Pages :
14
From page :
623
To page :
636
Abstract :
Natural coagulants have received much attention for turbidity removal, thanks to their environmental friendliness. The present study investigates potential application of rice starch for removal of turbidity from aqueous solutions. It considers the effects of four main factors, namely settling time (40140 min), pH (28), slow stirring speed (2060 rpm), and rice starch dosage (0200 mg/L), each at five levels, by means of central composite design. Results show that a quadratic model can adequately describe turbidity removal in case of nonautoclaved rice starch with statistics of R2= 0.95, R2adj.= 0.91, R2pred.= 0.77, AP = 23.75, and CV = 4.77. It has also been found that the performance of nonautoclaved rice starch is superior to the autoclaved variety, in terms of removal efficiency and floc size. In the optimal point, predicted by the model, a removal efficiency equal to 98.4% can be attained, using nonautoclaved rice starch, which is higher than that of the autoclaved rice starch (71.29%). The significant effective parameters have proven to be settling time along with pH. Overall, rice starch can be considered a promising high potential coagulant for removal of turbidity from water or wastewater.
Keywords :
Rice starch , high turbidity aqueous , Response Surface Methodology
Journal title :
Pollution
Serial Year :
2019
Journal title :
Pollution
Record number :
2453698
Link To Document :
بازگشت