Author/Authors :
Basaeria, Hamid Department of Mechanical Engineering - University of Utah, Salt Lake City , Zakerzadeh, Mohammad Reza School of Mechanical Engineering - University of Tehran , Yousefi-Koma, Aghil Center of Advanced Systems and Technologies (CAST) - School of Mechanical Engineering - University of Tehran , Faridi Rad, Nafise Department of Mechanical Engineering - University of British Columbia, Vancouver, Canada , Mahdavian, Mohammad Department of Mechatronic Systems Engineering - Simon Fraser University, Surrey, British Columbia, Canada
Abstract :
In this paper, hysteretic behavior modeling, system identification and control of a mechanism that is actuated by shape memory alloy (SMA) wires are presented. The mechanism consists of two airfoil plates and the rotation angle between these plates can be changed by SMA wire actuators. This mechanism is used to identify the unknown parameters of a hysteresis model. Prandtl–Ishlinskii method is employed to model the hysteresis behavior of SMA actuators, and then, a self-tuning fuzzy-PID controller is designed based on the obtained model and implemented experimentally on the mechanism. The process of designing the controller has been implemented based on the model which results in compensating time and price. Self-tuning fuzzy-PID controller is applied to the closed control loop in order to control the position of the morphing wing. The performance of the controller has been investigated under different input signals including square and sinusoidal waves, and the results show the proper effectiveness of the method.
