Title of article :
Fiber-matrix Adhesion on Industrial Geopolymer
Author/Authors :
Nogueira, A. Department of Civil Engineering - Federal Center of Technological Education Celso Suckow da Fonseca (CEFET/RJ), Rio de Janeiro, Brazil. , De Barros, S. Department of Mechanical Engineering - Federal Center of Technological Education Celso Suckow da Fonseca (CEFET/RJ), Rio de Janeiro, Brazil , Amaral Alves, L. Department of Mechanical Engineering - Federal Center of Technological Education Celso Suckow da Fonseca (CEFET/RJ), Rio de Janeiro, Brazil
Abstract :
The construction sector is responsible for relevant environmental impacts and one of its most crucial points is the use of concrete. Geopolymers represent the most promising green and ecological alternative for common Portland cement and cementitious materials, due to its proven durability, mechanical and thermal properties. This work presents an experimental and comparative study of adhesion at the fiber-matrix interface between glass fibers and carbon fibers added to the geopolymer matrix. This analysis was performed by pull-out test, whereby it was found that the greatest efficiency was obtained by reinforcing with the glass fibers, incorporated at 2 mm in the geopolymer matrix. As results, the adhesion between the fibers and the geopolymer structure can be assessed, as well as the optimum length of application
Keywords :
Carbon fibers , Composites , Geopolymers , Glass fibers , Pull-out test
Journal title :
Iranian Journal of Materials Science and Engineering
