Title of article :
Modeling and Experimental Investigation of a Variable Speed Drive Water Source Heat Pump
Author/Authors :
XUE, Zhifang Ministry of Education, Tsinghua University - Department of Thermal Engineering, Key Laboratory for Thermal Science and Power Engineering, China , XUE, Zhifang Guangxi Electric Power Industry Investigation Design and Research Institute, China , SHI, Lin Ministry of Education, Tsinghua University - Department of Thermal Engineering, Key Laboratory for Thermal Science and Power Engineering, China
Abstract :
Accurate variable speed characteristics are needed for water source heat pumps (WSHP) to design variable speed controls to adjust refrigerant flow rates in heat pumps and air conditioners. The system capacity can then be regulated to match the compressor loads to the heating or cooling needs to improve the energy efficiency and lower energy costs. The motor and compression characteristics of WSHP were modeled to include the coupling between the motor speed and the torque characteristics and compression characteristics. An analytical model is given for a variable speed hermetic scroll compressor that describes various factors, such as the drive frequency, suction pressure, and discharge pressure as a function of the compressor speed. The model was validated experimentally using R22 and R134a in an experimental WSHP with variable speed control using frequency conversion. The results show that the analytical model properly describes the variable speed characteristics and provides a control strategy for adjusting the capacity of scroll compressors to match the heat pump or air conditioner operating conditions.
Keywords :
scroll compressor , variable speed control , modeling , frequency conversion , water source heat pump
Journal title :
Tsinghua Science and Technology
Journal title :
Tsinghua Science and Technology