Title of article
Investigation on the Impact of Silicon Carbide and Process Parameters on Wire Cut-EDM of Al/SiCp MMC
Author/Authors
Phate, Mangesh Dept. of Mechanical Engg - All India Shri Shivaji memorial society’s College of Engineering, Pune, Maharashtra, India , Toney, Shraddha Dept. of Computer Engg - Sinhgad Institute of Technology & Science, Narhe, Pune, Maharashtra, India , Phate, Vikas Dept. of Electronics - Government Polytechnic, Murtizapur, Akola, Maharashtra, India
Pages
11
From page
177
To page
187
Abstract
In the present work, a model based on Dimensional Analysis (DA) coupled with the Taguchi method to
analyze the impact of silicon carbide (SiC) was presented. The Wire Cut Electrical Discharge
Machining (WEDM) performance of Aluminium Silicon Carbide (AlSiC) Metal Matrix Composite
(MMC) was critically examined. To formulate DA-based models, a total of 18 experiments were
conducted using Taguchi’s L18 mixed plan of experimentation. The input data used in the DA models
include a pulse on time, pulse off time, wire feed rate, % SiC, wire tension, flushing pressure, etc.
According to these process parameters, DA models for the surface roughness and the material removal
rate were predicted. The formulated DA models showed a strong correlation with the experimental
data. The analysis of variance (ANOVA) was applied to determine the impact of individual parameters
on response parameters.
Keywords
Al/SiCp MMC , ANOVA , Dimensional , Analysis , Taguchi method , WEDM
Journal title
International Journal of Industrial Engineering and Production Research
Serial Year
2020
Record number
2543278
Link To Document