Unified Pulsed Laser Range Finder and Velocimeter using Ultra-Fast Time-To-Digital Converter

In this paper, we present a high accuracy laser range finder and velocimeter using ultra-fast time-to-digital converter (TDC). The system operation is based on the measuring the round-trip time of a narrow laser pulse.A low-dark current high-speed PIN photodiode is used to detectthe triggeredlaserbeamand to producestart signal.The pulsed laser diode generates 45W optical power at 30ns duration time and 905nn1 wavelength. A high-responsivity avalanche photodiode (APD) detects the reflected beam from the target. An optical head including beam splitter, lenses and optical filters is also designed and implemented. The signal conditioner of the system includes pre- and post-amplifiers, comparator, opto-isolators and monostable. By using a 3MVIW reach-through structure avalanche photodiode and a wideband pre-amplifier, the pre-amplifier output reaches 15.9mV, resulting from the minimum detectable optical power. The APD temperature and as a result its responsivity is controlled by a thermoelectric controller unit. The start and stop signals from PIN and APDare led to the time-to-digital converterto count the roundtrip time of the laser beam. The system is tested by a retro-reflector as a target for 301200m distances. The resolutions of the distance and velocity measurement are limited to 18.75mm and 1.2mJs, respectively. In the worst condition, the minimum reflected optical poweris limitedto about 5.3nWin 1.2kmdistance.