Author/Authors :
Zare, Hossein babol noshirvani university of technology - Faculty of Chemical Engineering - Biotechnology Research Lab, بابل, ايران , Najafpour, Ghasem babol noshirvani university of technology - Faculty of Chemical Engineering - Biotechnology Research Lab, بابل, ايران , Heydarzadeh, H. babol noshirvani university of technology - Faculty of Chemical Engineering - Biotechnology Research Lab, بابل, ايران , Rahimnejad, Mostafa babol noshirvani university of technology - Faculty of Chemical Engineering - Biotechnology Research Lab, بابل, ايران , Tardast, Ali babol noshirvani university of technology - Faculty of Chemical Engineering - Biotechnology Research Lab, بابل, ايران
Abstract :
Biodegradation of ethyl acetate in batch and continuous cultures was investigated. Pseudomonas putida was selected as a biological agent to biodegrade ethyl acetate. In batch experiment, biodegradation of ethyl acetate was performed in the range of 25-35°C. Walnut shells treated with alkaline solution as natural packing materials provided an appropriate environment for the growth and immobilization of microorganisms. The active biofilm was fully established on the surface of natural packing material. In the early stage, experiments were performed at Empty Bed Resistance Time (EBRT) of 60 s. Maximum removal efficiency of 99% was achieved at inlet concentrations lower than 430 ppm of ethyl acetate. The removal efficiency dropped to 80% with an increase of inlet concentration of ethyl acetate. In order to enhance the removal efficiency, the EBRT was increased from 60 to 75 s. At EBRT of 75 s, the removal efficiency was maintained above 80% even though the inlet concentration increased to 5150 ppm. Michaelis-Menten and Logistic models were perfectly fitted to experimental data. In addition, the kinetic parameters of presented models were defined
Keywords :
Biodegradation , Logistic model , Michaelis–Menten , Pseudomonas putida , Walnut shell
