Title of article :
Case Study in Increasing Overall Equipment Effectiveness on Progressive Press Machine Using Plan-do-check-act Cycle
Author/Authors :
Jaqin, C. Industrial Engineering Program - Mercu Buana University, Jakarta, Indonesia , Rozak, A. Industrial Engineering Program - Mercu Buana University, Jakarta, Indonesia , Hardi Purba, H. Industrial Engineering Program - Mercu Buana University, Jakarta, Indonesia
Abstract :
Press automotive components manufacturer in Indonesia with the Overall Equipment Effectiveness
(OEE) achievement was 60.7%, it was below than world company level as mention in Japanese Institute
of Plant Maintenance (JIPM)- Total Productive Maintenance (TPM) standard, the biggest OEE
components problem was availability value that achieved 63.3%, then the biggest availability problem
was dies preparation time. Using TPM method and Plan-Do-Check-Act (PDCA) cycle with Pareto chart
and Fishbone diagram, we succeeded to improve dies setting time within one months. We could increase
the availability value from 63.3% became 67.8% and finally OEE value increased from 60.7% became
65.3%
Keywords :
Total Productive Maintenance , Availability , Overall Equipment Effectiveness , Plan-do-check-act Cycle
Journal title :
International Journal of Engineering
