Title of article
Detection of Hazardous Volatile Organic Compound by Using Semiconductor Based Catalytic Pellet
Author/Authors
Abu Bakar, Mohamad Zailani Universiti Sains Malaysia, Engineering Campus - School of Chemical Engineering, Malaysia , Abdullah, Ahmad Zuhairi Universiti Sains Malaysia - School of Chemical Engineering, Malaysia , Lian, Lau Ee Universiti Sains Malaysia - School of Chemical Engineering, Malaysia , Juhari, Jusliha Universiti Sains Malaysia - School of Chemical Engineering, Malaysia
From page
231
To page
237
Abstract
Catalytic pellets that comprise of various compositions of titanium oxide (TiO2) and tin oxide (SnO2) as a substrate have been developed for detection of volatile organic compound (VOC). The pellets were tested for gas-sensing properties in the experimental rig at temperature ranges between 100°C to 400°C. The morphological and structural characteristics of the catalytic pellets were investigated by means of a Scanning Electron Microscope (SEM) and X-ray Diffraction (XRD). The results showed that the sensitivity of the pellet decreased at higher compositions of TiO2.The structural analysis revealed the appearance of Ti0.1Sn0.9O2 phase, rather than TiO2 phase in the TiO2-SnO2 catalytic pellets. The surface morphology of the pellets indicated that the average grain size decreased with the addition of TiO2.
Keywords
Catalytic pellet , ethanol vapour sensor , VOCs , semiconductor based sensor , titanium oxide , tin oxide
Journal title
Pertanika Journal of Science and Technology ( JST)
Journal title
Pertanika Journal of Science and Technology ( JST)
Record number
2577200
Link To Document