Title of article
UV-Curable Palm Oil Based-Urethane Acrylate/Clay Nanocomposites
Author/Authors
Salih, A. M. Universiti Putra Malaysia - Faculty of Science - Department of Chemistry, Malaysia , Salih, A. M. Sudan Atomic Energy Commission - Department of Radiation Processing, Sudan , Wan Yunus, Wan Md. Zin National Defence University of Malaysia - Centre for Defence Foundation Studies - Department of Chemistry, Malaysia , Mohd Dahlan, Khairul Zaman Malaysian Nuclear Malaysia - Radiation Processing Technology Division, Bangi , Mahmood, Mohd Hilmi Malaysian Nuclear Malaysia - Radiation Processing Technology Division, Malaysia , Ahmad, Mansor Universiti Putra Malaysia - Faculty of Science - Department of Chemistry, Malaysia
From page
425
To page
433
Abstract
Synthesis of palm oil based-urethane acrylate (POBUA) resins was carried out by acrylation of epoxidized palm oil (EPOP) using acrylic acid in the presence of a catalyst and followed by isocyanation to obtain the POBUA. Using the monomer as a diluent in the formulation, 4% of photoinitiator and incorporation of organoclay (1-5% wt), nanocomposites were obtained upon UV irradiation. The X-ray Diffractory XRD study revealed that the nanocomposites obtained were of the exfoliation type. The presence of the clay improved the hardness and did not affect the thermal stability. Similarly, it increased the glass transition temperature Tg but reduced the modulus as the clay content was increased. The improvement of the tensile strength was only obtained when the clay concentration was 5 phr.
Keywords
Nanocomposites , Palm oil based , resin , urethane acrylate , UV , curing
Journal title
Pertanika Journal of Science and Technology ( JST)
Journal title
Pertanika Journal of Science and Technology ( JST)
Record number
2577212
Link To Document