Title of article
Water Pumping System with PLC and Frequency Control
Author/Authors
Alia, Akayleh Tafila Technical University - Department of Electrical Engineering, Jordan , Al-Soud, Mohammed Al- Balqa Applied University - Department of Mechanical Engineering, Jordan , Abdallah, Essam Al- Balqa Applied University - Department of Mechanical Engineering, Jordan , Addallah, Salah Applied Science University - Department of Mechanical and Industrial Engineering, Jordan
From page
216
To page
221
Abstract
In this study controlled water pumping system is designed, constructed, and modeled. The programming method of control of pumping flow rate is achieved by means of integrated programmable logic controller (PLC) and frequency inverter (FI). PLC main function is to determine the required flow rate levels and the related time intervals of the flow rate hold time. (FI) is used to control the dynamic change of temperature between various operating points. The designed system shows the capability for full control of pumping flow rate from zero to maximum for any required range of time in case of increasing or decreasing the pumping flow rate. All variables of the system will be changed gradually until reaching their needed working points.The mathematical model of water pumping system with PLC and frequency control is built based on MATLAB-SIMULINK . A test rig built and an experimental study was performed. From the analysis of the experimental starting dynamic characteristics of water pumping system and modeled characteristics, it was noticed that they are very similar.
Keywords
PLC , Frequency Control , Water Pumping System , Dynamic Characteristics.
Journal title
Jordan Journal of Mechanical and Industrial Engineering
Journal title
Jordan Journal of Mechanical and Industrial Engineering
Record number
2586231
Link To Document