Title of article :
Empirical Model Evaluation of Sedimentary Residual Soil Bearing Capacity from Surface Wave Method
Author/Authors :
Rosyidi, Sri Atmaja Universiti Muhammadiyah Yogyakarta - Jabatan Kejuruteraan Awam, Indonesia , Rosyidi, Sri Atmaja Universiti Kebangsaan Malaysia - Fakulti Kejuruteraan Alam Bina - Jabatan Kejuruteraan Awam dan Struktur, Malaysia , Taha, Mohd. Raihan. Universiti Kebangsaan Malaysia - Fakulti Kejuruteraan Alam Bina - Jabatan Kejuruteraan Awam dan Struktur, Malaysia , Nayan, Khairul Anuar Mohd Universiti Kebangsaan Malaysia - Fakulti Kejuruteraan - Jabatan Kejuruteraan Awam dan Struktur, Malaysia
Abstract :
Bearing capacity of the subgrade layers has significant influence on the performance of the overall pavement structure. In this study, the Spectral Analysis of Surface Wave (SASW) method was used for assessing the stiffness of pavement subgrade layer. The SASW method employed was based on the Rayleigh-wave propagation. Using the phase difference data of Rayleigh waves, the experimental dispersion curve of phase velocity was obtained. Consequently, inversion process was conducted to obtain the shear wave velocity and the dynamic modulus of the pavement structure. The results showed that some empirical models of the shear wave velocity and the dyamic elastic modulus versus soil bearing capacity of the California bearing ratio (CBR) and dynamic cone penetrometer (DCP) were derived. Good agreement was also found between these empirical models compared to that of previous studies.
Keywords :
SASW method , soil subgrade , shear wave velocity , elastic modulus , CBR , DCP
