Title of article :
STRENGTHENING OF RC BEAMS IN FLEXURE USING FERROCEMENT
Author/Authors :
KHAN, S.U. University of Engineering and Technology, Pakistan , RAFEEQI, S.F.A. University of Engineering and Technology, Pakistan , AYUB, T. University of Engineering and Technology, Pakistan
From page :
353
To page :
365
Abstract :
Assessment of the effectiveness of ferrocement strengthening techniques i.e., cast in situ Ferro-mesh layers and precast ferrocement Laminate is the aim of this experimental investigation. To accomplish this objective, ten (10) reinforced concrete beams including one control beam have been intentionally designed and detailed to fail in flexure. Prior to strengthening, beams have been tested under two-point loading till service limit. Beams have been strengthened in the flexural dominant region only and tested to failure under the same loading arrangement. It has been concluded that strengthening through cast in situ Ferro-mesh layer is the most efficient technique, whereas strengthening of the beams by using precast Ferrocement Laminate B is not only easy to implement at household level, but is also promising in terms of enhancing load carrying capacity, stiffness and ductility.
Keywords :
Ferrocement , ferro , mesh , laminate , layers , flexural strengthening
Journal title :
Iranian Journal of Science and Technology: Transactions of Civil Engineering
Journal title :
Iranian Journal of Science and Technology: Transactions of Civil Engineering
Record number :
2596069
Link To Document :
بازگشت