LETTER TO THE EDITOR A Safe Technique to Remove the Hip Spica

Hip spica is commonly used in the management of developmental dysplasia of the hip1 and femur fractures in young children2 . Removal of the spica cast is commonly performed in the outpatient clinic or under general anaesthesia. The procedure is not free from complications. Physical or thermal injury to the skin due to the moving blade of the oscillating saw blade may occur especially around the groin area where it is difficult to estimate the thickness of the cast material3 . We would like to share a method of hip spica removal that we feel is associated with lower risk of skin injury. First, we should prepare the basic instruments for hip spica cast removal (Fig. 1). The child with spica cast is then placed in supine position. Three lines of cut are drawn over the anterior surface of the spica cast (Fig. 2). The first line is drawn from the midpoint of the superior rim vertically downwards to the groin opening. The shorter limb of the spica cast is usually on the contra-lateral to the unstable hip or fractured femur. The second line is drawn from the midpoint of the inner distal rim, extending horizontally to the groin opening. The longer limb of the cast is usually on the ipsilateral side of the pathological condition. A third anterior line is drawn from the midpoint of the inner ankle, extending proximally crossing the medial aspect of knee, and horizontally towards the groin opening. Cutting the spica cast along these lines would circumvent the groin crease, which is one of the common sites of skin injury. In addition, soft tissue protector can be inserted between the cast and skin along these lines to further reduce the risk of skin injury. Once the cuts had been performed, a spreader is used to ensure that the cuts were complete (full thickness).