Title of article
CHARACTERIZATION OF GLASS-CERAMICS PRODUCED FROM VITRIFICATION OF CLASS F MALAYSIAN COAL FLY ASH
Author/Authors
Convery, M. University of Melbourne - Melbourne School of Engineering - Department of Chemical Biomolecular Engineering, Australia , Downing, L. University of Melbourne - Melbourne School of Engineering, - Department of Chemical Biomolecular Engineering, Australia , Yin, C.Y. Universiti Teknologi MARA - Faculty of Chemical Engineering, Malaysia , Goh, B.M. Universiti Teknologi MARA Perlis - Faculty of Applied Sciences, Malaysia , Sharifah, A.S.A.K. Universiti Teknologi MARA - Faculty of Chemical Engineering, Malaysia
From page
1
To page
4
Abstract
A glass-ceramic material was produced from class F Malaysian coal fly ash by using vitrification method. Determination of physico-chemical properties of formed samples was conducted using X-ray diffraction (XRD), scanning electron microscopy (SEM), Rockwell hardness and toxicity characteristic leaching procedure (TCLP). XRD analysis showed an amorphous annealed material followed by the strong crystal growth of quartz and mullite phases over the heat treatment stage. Growth of crystalline phase was also observed. The TCLP results showed that the glass-ceramic was non-hazardous. Results showed that it was technically possible to use vitrification to produce glass-ceramics from Malaysian coal fly ash
Keywords
Glass , ceramics , Class F coal fly ash , Characterization , Vitrification , Metal leachability
Journal title
International Journal of Mechanical and Materials Engineering
Journal title
International Journal of Mechanical and Materials Engineering
Record number
2663347
Link To Document