Title of article :
Determine the Useful Life of Catalytic Converter and Standard Revision of Technical Inspection Centers
Author/Authors :
Majidi-Jirandehi, Ali Akbar Department of Mechanical Engineering - Payame Noor University (PNU) - Tehran, Iran , Mohammadi Soleymani, Moslem Department of Mechanical Engineering - Payame Noor University (PNU) - Tehran, Iran , Dehghani, Hossein Department of Mechanical Engineering - Shahid Bahonar University - Kerman, Iran
Pages :
6
From page :
3614
To page :
3619
Abstract :
Today, many car manufacturers can achieve emission standards through catalytic converters. The goals of this research was in tow sections. Initially, the amount of pollutants was measured to determine the role of the catalytic converters in the reduction of pollutants for 3 types of vehicles and in 50 cases, in the two stages before and after the catalytic converter. Then, to achieve the useful life of the catalytic converter, out of 750 test vehicle emissions were tested. Data analysis was done by SPSS software, which shows that catalytic converters can reduce up to 80% of exhaust emissions. This is independent of the type of vehicle. The useful life of the catalytic converters is up to 36 months, so they should be replaced at least every three years. Also, the pollutant standards of the technical examination centers are reviewed. For this purpose, the pollutants have been measured in 2200 vehicles. Due to the huge difference in technology, cars are divided into two main categories of carburetor and injector and are analyzed statistically. Eventually, for each group of these vehicles, the values of HC, CO and O2 are obtained.
Keywords :
Technical Inspection , Pollution standard , Pollutants , Catalytic Converters
Journal title :
Automotive Science and Engineering
Serial Year :
2021
Record number :
2666001
Link To Document :
بازگشت