Lateral Safety Enhancement in a full Dynamic Vehicle Model Based on Series Active Variable-Geometry Suspension

Today, the importance of providing safety and stability while pay attention to the ride comfort and providing road holding is of paramount importance. This issue has become more important due to the many accidents related to vehicle rollover. In this article, an attempt has been made to reduce the risk of rollover prevention of the vehicle while pay attention to the needs of the occupant and the road. In this research, an attempt has been made to reduce the overall acceleration of the GT vehicle by using a series of active variable geometry suspensions and by using a variety of control strategies such as Fuzzy PID, LQR, Sliding mode. In previous works, PID and Skyhook controllers have been used. However, in this study, the choice of the controllers is based on attention to accuracy and optimization while pay attention to control aims. This study was performed in conditions of severe asymmetric roughness and cornering maneuvers. The examination of the results shows an improvement of more than 20% for the goal of vehicle stability while providing other suspension goals. This performance improvement occurs with the effect of suspending variable geometry along with the use of a suitable controller. It should also be noted that the improvement achieved by consuming energy is far less than other suspensions, which is the strength of the research.