Title of article
Characteristics of Hollow Cone Swirl Spray at Various Nozzle Orifice Diameters
Author/Authors
Hussein, A. Universiti Teknologi MARA (UiTM) - Faculty of Mechanical Engineering, Malaysia , Hafiz, M. Universiti Teknologi MARA (UiTM) - Faculty of Mechanical Engineering, Malaysia , Rashid, H. Universiti Teknologi MARA (UiTM) - Faculty of Mechanical Engineering, Malaysia , Halim, A. Universiti Teknologi MARA (UiTM) - Faculty of Mechanical Engineering, Malaysia , Wisnoe, W. Universiti Teknologi MARA (UiTM) - Faculty of Mechanical Engineering, Malaysia , Kasolang, S. Universiti Teknologi MARA (UiTM) - Faculty of Mechanical Engineering, Malaysia
From page
1
To page
4
Abstract
An experimental work to investigate the swirl spray characteristics that emanates from hollow-cone and solid-cone spray simplex atomizers is presented. Main objective of the research is to investigate the spray characteristics, i.e. spray breakup length, discharge coefficient and spray cone angle at different nozzle orifice diameter and injection pressure. Discharge coefficient is almost uninfluenced by the operating Reynolds number. This test also reveals that both breakup length and spray cone angle increases as orifice diameter is increased. Higher injection pressure leads to shorter breakup length and wider spray cone angle.
Keywords
Simplex nozzle , spray cone angle , discharge coefficient , breakup length
Journal title
Jurnal Teknologi :F
Journal title
Jurnal Teknologi :F
Record number
2715746
Link To Document