Title of article :
Experimental Study and Comparison of a Few Lean (gasoline-natural gas) Dual Fuels Based on Safe Optimum Spark Advance
Author/Authors :
Yekani, S. K. Department of Mechanical Engineering - Faculty of Engineering - University of Mohaghegh Ardabili, Ardabil, Iran , Abdi Aghdam, E. Department of Mechanical Engineering - Faculty of Engineering - University of Mohaghegh Ardabili, Ardabil, Iran , Sarabi, M. Department of Mechanical Engineering - Faculty of Engineering - University of Mohaghegh Ardabili, Ardabil, Iran
Abstract :
Strong dependence of the humans daily life on the engine-powered vehicles, increasing environmental
pollutions, especially in urban areas, and reduction of the world oil resources have challenged the
energy researchers to make appropriate decisions at regional scale for selecting alternative fuels to
improve the engine eciency and fuel economy. In the current work, the lean-burn idea jointed to
dual (gasoline-NG) fuel has been considered to develop the SI engines. To investigate the performance
and exhaust gas emissions, experimental tests were performed using a single-cylinder research engine
with gasoline-NG dual fuels, including four mass-based blends of the two fuels (G100, G87.5, G75,
and G62.5 containing gasoline at 100%, 87.5%, 75%, and 62.5%, respectively, with the remaining part
being composed of NG), at 1800 rpm ES and 0.9 ER under at least seven dierent SAs. The result
showed that increasing the NG fraction in the fuel blend, both the and COV of imep decreased. It
was implicitly observed that, for blended fuels, non-uniform distribution of each fuel can serve as a
new source for cyclic variations. Under the considered lean burning condition at optimal safe SA, the
imep and output torque for the gas-contained fuel blends were comparable to those obtained by the
pure gasoline. Also, it was detected that an increase in the CR reduced the emitted amounts of HC
and CO pollutants.
Keywords :
Dual fuel SI engine , Gasoline , Natural gas , Optimum Spark Advance , Emissions , Leanburn
Journal title :
International Journal of Industrial Mathematics(IJIM)