Title of article
Preparation of Surface Amino Modified Magnesium Doped Lithium Manganese Oxide Nanosorbent and Its Investigation for Dye Removal
Author/Authors
Saravaia ، Hitesh Council of Scientific Industrial Research (CSIR) - CSIR-Central Salt and Marine Chemicals Research Institute (CSIR-CSMCRI) , Ray ، Sanak Council of Scientific Industrial Research (CSIR) - CSIR-Central Salt and Marine Chemicals Research Institute (CSIR-CSMCRI) , Chanchpara ، Amit Council of Scientific Industrial Research (CSIR) - CSIR-Central Salt and Marine Chemicals Research Institute (CSIR-CSMCRI) , Bhatt ، Dhruv Council of Scientific Industrial Research (CSIR) - CSIR-Central Salt and Marine Chemicals Research Institute (CSIR-CSMCRI)
From page
3069
To page
3078
Abstract
Magnesium-doped lithium manganese oxide nanoparticles were modified with 3-aminopropyl-trimethoxysilane and characterized by XRD, FTIR, TGA, and TEM analytical techniques. The sorption of Malachite Green on adsorbent with respect to nanosorbent amount, dye concentration effect, pH influence, and contact time was performed to obtain the maximum adsorption conditions. The pseudo-first-order, pseudo-second-order, and intraparticle diffusion kinetic models were evaluated and found better fitting with the pseudo-second-order (R2 = 0.995). The Freundlich isotherm is found to be suitable (R2=0.989) to describe the sorption process of Malachite Green on prepared adsorbent. Malachite Green spiked Lake Water, NKCM (Na+, K+, Ca+2, Mg+2 containing) water, and Sea Water were tested and evaluated for the adsorption capability and found 46.9 %, 44.6%, and 40.7 % removal performance, respectively.
Keywords
Nanosorbent , Malachite Green Removal , Li , Mg , Mn , O Nanostructure , Solid state Synthesis , Adsorption
Journal title
Iranian Journal of Chemistry and Chemical Engineering (IJCCE)
Journal title
Iranian Journal of Chemistry and Chemical Engineering (IJCCE)
Record number
2768071
Link To Document