The Effect of Priming new Plastic Spacers with 20 Puffs Salbutamol on Bronchodilator Response in Asthmatic Children

The static charge on the plastic body of spacers attracts drug aerosols, reducing the drug available for inhalation from plastic spacers. Some instructions exist to decrease the electric charge on plastic spacers, such as priming them with salbutamol (20 puffs) before use. This study investigates whether priming plastic spacer devices with this method can improve the bronchodilator test result. This study included children with stable mild to moderate asthma. All subjects underwent two pulmonary function tests to evaluate their bronchodilator response on separate days at 24-48 hours intervals. On each day, spirometry was performed at the baseline and 15 min after inhalation of four puffs of salbutamol (100 μg/puff) through either a primed or a new spacer. The change in forced expiratory volume in the first second (FEV1) after inhaling salbutamol was the primary outcome measure. When the patients used a new spacer, the mean baseline FEV1 (% predicted) and FEV1/FVC (forced vital capacity) were 89.56±11.95 and 86.17±6.87, respectively. However, the mean increase in FEV1 from the baseline was 10.87±8.99 in this group. On the other hand, with the primed spacer, the respective mean baseline FEV1 and FEV1/FVC values were 89.41±12.14 and 85.49±6.76, while it increased by 12.1±11.01 after salbutamol inhalation. There were no significant differences between the techniques regarding the variation in FEV1 before and after bronchodilator use via a new spacer or primed spacer. Priming new plastic spacers with 20 puffs of salbutamol did not cause additional bronchodilation in asthmatic children, suggesting this practice is inefficient in clinics.