Effect of interaction multiplicity on controlsy stem design for a MTBE reactive distillation column

The control strategy of a reactive distillation for synthesis of MTBE is investigated. Although steady state multiplicities occur in the column, a linear control is still possible since a controlled and manipulated variable-pairing scheme that exhibits a sufficiently large range of near linear relations can be found, if we operate at constant reflux ratio. Reboiler duty is used to control the temperature of a stage just below the reaction section and near the top of the stripping section. Stoichiometric balance is controlled by a feed ratio plus internal composition control scheme, using a control valve installed on the C4 feed-line as the manipulated variable. Such a scheme is capable of maintaining the desirable steady state that achieves high product purity and reactant conversion. However, a similar scheme that uses a control valve installed on the methanol feed-line as the manipulated variable shows severe oscillation. It is caused by multiplicity in the interaction between the temperature and stoichiometric control loops.