Abstract :
In the present work the thermal-hydraulics of reactivity-induced transients in low enriched uranium (LEU) core of a typical material test research reactor (MTR) are analyzed using the previous program developed by Khater et al. The analysis was done for uncontrolled withdrawal of a control rod with scram-disabled conditions. Initiating reactivity events with and without the influence of reactivity efficiency curve (“S” curve) were considered. The results of the proposed transients are analyzed and compared with each other. In transient without the “S” curve influence, a high primary peak power of 406.18 MW is attained and a clad melt down takes place after 1.85 s. In the transient with the “S” curve influence, a high super prompt-critical situation is produced (1.762$ at 0.895 s) with a very high primary peak power of 801.05 MW at 0.912 s. Also, a fast clad melt down is resulted in the hot channel at 1.088 s and a stable film boiling is established. This study indicates that, compared to the application of linear reactivity curve, the application of the reactivity efficiency curve results in the prediction of higher peaks in power and temperatures (fuel, clad and coolant) with a fast clad melt down.
