Development of a method of evaluating an inventory of fission products for a pebble bed reactor

The design of the high temperature gas-cooled reactor (HTGR) has evolved and the relevant safety requirements have been defined; accordingly, the source term to be used as the basis for licensing must also be developed. However, analysis of the source term in the HTGR has not been adequately investigated and there has not been definite improvement in this respect. Because radioactivity in normal operation must be well understood, the purpose of this study is to establish a method for activity evaluation by the code combination MCNP-ORIGEN-MONTEBURNS-MOTEX. The sophisticated method, which constructs the HTR-10 core by using the unit lattice of a hexagonal prism, is developed for core modeling. The MCNP modeling is used to simulate the generation of fission products with an increase of burnup, and ORIGEN is utilized for depletion calculation of each fission product. Continuous fuel management is divided into five discrete periods for the feeding and discharging of fuel pebbles. MONTEBURNS is used for discrete fuel management. In short, this work by aid from MOTEX traces 41 isotope nuclides, the results of which seem highly probable. In addition, the inventory of actinides at the end of each cycle is also investigated. It would be informative when the waste management of spent fuel of HTGRs would be taken into account. This article lays the foundation for future work on the analysis of the source term in HTGRs and will hopefully serve as a platform from which the safety assessment of radioactive material release during accidents can be undertaken in future.