Title of article :
Continuous anaerobic treatment of wastewaters containing
formaldehyde and urea
Author/Authors :
G. Vidal، نويسنده , , Z.P. Jiang، نويسنده , , F. Omil، نويسنده , , F. Thalasso، نويسنده , , R. M endez، نويسنده , , J.M. Lema، نويسنده ,
Issue Information :
روزنامه با شماره پیاپی سال 1999
Abstract :
The toxicity of formaldehyde (FA) in batch assays, using volatile fatty acids (VFA) as co-substrate, and the continuous anaerobic
treatment of wastewaters containing FA in up¯ow anaerobic sludge blanket (UASB) reactors was investigated. In batch studies, FA
exerted a 50% methanogenic toxicity on VFA at concentrations of around 100 mg/l, 2.5 times lower than values reported with
sucrose. Although at FA concentrations higher than 200 mg/l methanogenesis was completely inhibited, a partial recovery of the
bacterial activity was observed after 250 h when the FA had been removed from the medium. The continuous anaerobic degradation
of FA at concentrations up to 2 g/l, using 1.6 g/l of glucose as co-substrate, was studied in a UASB reactor. A stable and ecient
operation was observed at organic loading rates (OLR) of 6.0 g COD/lád and with a COD/FA ratio as low as 1.4. A synthetic
substrate with the same characteristics as the euents produced during ®breboard adhesives manufacturing (based on urea-FA), i.e.
0.95 g FA/l and 0.35 g urea/l, was treated in a UASB reactor. The applied OLR and nitrogen loading rate (NLR) were 3.45 g COD/
lád and 0.58 g N/lád, respectively. COD removal eciencies were maintained at 90±95%, FA and urea being completely degraded.
Keywords :
Formaldehyde , urea , toxicity , anaerobic treatment , UASB reactors , Adhesives manufacturing wastewaters
Journal title :
Bioresource Technology
Journal title :
Bioresource Technology