Biosorptive removal of cadmium from contaminated groundwater and industrial effluents

The cadmium removing capacity of a biosorbent Calotropis procera, a perennial wild plant, is reported here. The biomass was found to possess high uptake capacity of Cd(II). Adsorption was pH dependent and the maximum removal was obtained at two different pH i.e. pH 5.0 and 8.0. Maximum biosorption capacity in batch and column mode was found to be 40 and 50.5 mg/g. The adsorption equilibrium ( 90% removal) was attained within 5 min irrespective of the cadmium ion concentration. Interfering ions viz. Zn(II), As(III), Fe(II), Ni(II) interfered only when their concentration was higher than the equimolar ratio. The Freundlich isotherm best explained the adsorption, yet the monolayer adsorption was also noted at lower concentrations of Cd(II). The FTIR analysis indicates the involvement of hydroxyl (–OH), alkanes (–CH), nitrite (–NO2), and carboxyl group (–COO) chelates in metal binding. The complete desorption of the cadmium was achieved by 0.1 M H2SO4 and 0.1 M HCl. The C. procera based Cd(II) removal technology appears feasible.